Guide to choosing door hardware

Sometimes referred to as mutes, silencers are used to cushion the closing of a door in a wood or metal frame, thus quieting the closing of the door. Door silencers are small rubber buttons, approximately 1/8” thick, with a projecting portion for insertion into holes prepared in the stop of frame.

Protective plates are used on doors in all types of buildings. They are designed to protect doors from scratches, dents and other damage caused by moving equipment through openings.

Door coordinators are used to control the closing sequence of a pair of doors when both leaves are furnished with latching hardware and one leaf latches into the other of has an overlapping astragal. Typically, these openings will have a vertical rod exit device or automatic flush bolts installed on

Locks are one of the world's oldest inventions, with a wide variety and thousands of years of development. The door lock is one of the locks that are indispensable for any occasion in our lives. The importance of door locks is particularly evident. Today we will combine the definition and characteristics of door locks with a brief summary and analysis of door locks.

With the development of metalworking technology, the use of door hardware is becoming more and more widespread. door hardware is an extremely important type of everyday metalwork in people's daily lives, and it is used in wooden doors, glass doors, sectional doors and other metal devices made by man

The product we are presenting today is the door hinge, an important component for safety and security, which is used to connect various doors. In this article, we will describe the functions and types of door hinges, as well as some advice on how to choose them.

A ​door closer is an adjustable and spring-loaded mechanical arm that closes a door automatically after it has been opened. Door closers are usually filled with hydraulic fluid, which dampens the door swing and controls its operation. Installing a door closer adds a level of control to your door's safety and security.

An exit device is a piece of hardware mounted on the push side of a door. It is designed to release a latching mechanism in the event of panic. Exit devices are intended to operate without prior knowledge or training when pressure is applied to horizontal bar or push pad mounted to the door. Because of their direct effect upon life safety, exit devices are one of the most important hardware items in a building. Panic Hardware and Fire Exit Hardware are two different types of exit devices, and the proper selection is determined by code requirements.

Door hardware is an important part of the door, in the design and calculation of door hardware selection, hinge as a load-bearing component, has an important position. The bearing capacity of hinge affects the safety performance and service life of the whole door.

The hinges are one of the most active components of any opening combined with the lock, exit device and closer. Hardware in general is not thought of unless it does not work properly, and the door unit will not function properly if the proper hanging device is not specified. So, how do we determine The hinges are one of the most active components of any opening combined with the lock, exit device and closer. Hardware in general is not thought of unless it does not work properly, and the door unit will not function properly if the proper hanging device is not specified.