Product Information

CODE LIST FOR SURFACE TREATMENT/ FINISHESUSAENGAbbr.03Polish BrassPB03AAntique BrassABUS11Antique CooperAC04Satin BrassSBUS10BDark BronzeDB24KT24 Gold PlatedGPUS26Bright ChromeBCUS26DSatin ChromeSCUS26D-03Pearl ChromePCUS32DSatin Stainless SteelSSSUS32Polish Stainless SteelPSSUS3-605E

A flag hinge is a piece of hardware used to allow movement of two pieces of material. They are commonly used on various types of doors to facilitate directional movement; the flag hinge itself is usually mounted on a vertical plane, thereby allowing horizontal movement of a door or other piece of material. The hinge consists of two parts: a male end with a plate and a pin, and a female end with a plate and a receiving slot. The two parts are joined together once each plate is secured to a different piece of material.

Keeping brass hinges shiny and clean is very important. But over time, they might acquire a bit of grime or tarnish. Do you want to clean brass hinges by yourself? Now there are six ways which can help you clean them.

In general, as long as there are doors, locks are needed, and locks are an integral part of any place. A door lock can protect the personal belongings are not violated, so to ensure the integrity of the lock is important. However, as the years accumulate, dust accumulation, wear or rust will occur on the locks, so do you know how to fix the locked door lock?

IntroductionAustenitic stainless steels are generally non-magnetic with magnetic permeabilities of around 1.0. Permeabilities above 1.0 are associated with the amount of either ferrite or martensite phases present in the 'austenitic' steel and so depend on:chemical composition cold work and heat tr

Are classified under the same classifications as the door hardware in/on which they are integrated. This means that the access control systems supplied by GBM Solutions is classified according to EN1303 – cylinder for locks, DIN EN 18252 – locking cylinder for door locks, DIN EN 1906-door handles and door konbs and DIN EN 179 apply for the equipment that we supply .

D&D grade 3 level handle are suitable for high frequency of use by public or others with little incentive to exercise care and with a high chance of misuse , e.g.public office doors ,common area doors etc.

The D&D pinning Center is staffed by factory trained technicians and is equipped with the latest computerized software and key cutting machinery.

Guidelines for frequency of door usage and standard for lock Build type Daily usage Yearly usageStandard for lock High frequency & Heavy weight door Large department store entrance 5,000 1,825,000 ANSI standard Lock Hospital corridor and surgical

American National Standard Institute(ANSI).European(EN).Australian Standard(AS).CNACL China Local Fire Test Beauer Certificate CANCL to be satisfied