Panic exit device

The surface vertical rod exit device mounts to the surface of the door. A top and a bottom rod extend the full height of the door and are attached to latch-bolt assemblies. The top latch-bolt assembly engages a strike that can be either surface-applied or mortised into the soffit of the frame. The bottom latch-bolt assembly can latch into a surface-applied or mortise strike in the floor. A latch-track threshold can also serve as a strike to secure the bottom latch-bolt assembly. Similar to rim exit devices, the operating trim extends through the door thickness and engages the lock case of the exit device. The clearance between the door bottom and the finished floor is an important dimension that needs to be addressed. Depending on the design of the latch-bolt assembly and the strike, the doors may have to be ordered with a non-standard undercut to ensure the latch-bolt can properly engage the strike.

An exit device is a piece of hardware mounted on the push side of a door. It is designed to release a latching mechanism in the event of panic. Exit devices are intended to operate without prior knowledge or training when pressure is applied to horizontal bar or push pad mounted to the door. Because of their direct effect upon life safety, exit devices are one of the most important hardware items in a building. Panic Hardware and Fire Exit Hardware are two different types of exit devices, and the proper selection is determined by code requirements.

The necessity of panic exit device The scene of the fire is unpredictable. First, people inhale a large amount of smoke and cause fatigue and even loss of consciousness. If it is an ordinary handle lock or ball lock for an escape door, let alone pulling down or turning the handle to push the door ou

Fire Exit Hardware is an exit device which is tested for both panic and fire conditions and is required to be used on fire doors where panic hardware is required by code or desired for durability. Since fire doors require positive-latching, fire exit hardware does not incorporate mechanical dogging. If a push/pull function is desired for a fire door, electric latch retraction hardware may be installed, as long as the latch projects automatically upon fire alarm.

Fire Rated Double Door Hardware is suitable for Auditorium Exits Double Door, Escape Gallery Double Door, Gallery Double Door, Lift Lobby, Stairwell Emergency Exit Double Door, Stairwell Emergency Exit Double Door, etc.

The fire rating classification of the wall into which the door is installed dictates the required fire rating of the door. The location of the wall in the building and prevailing building code establish the wall's fire rating.

A fire can be devastating to company property, but it doesn't have to be if you take into account fire-rated wood doors. With the right products, a fire can be controlled to minimize damage and provide safety to employees and customers.

Steel fire doors are "rated" by time (in minutes or hours) that a door can withstand exposure to fire test conditions. Hourly ratings include 1-1/2-hours, 1-hour, 3/4-hour, and 1/3-hour, with the maximum rating required of any swinging type fire door being three hours.

There can be confusion in the marketing of door hardware when it comes to products that are "fire rated". When you scan through a suppliers catalog you will often find the notation that the hardware is "fire rated". But non fire rated door Hardware and fire rated door Hardware are two different types of door device.

Metal doors, most commonly used in buildings, have changed from being used outdoors to being used indoors (instead of wooden doors).Hardware is the most important determinant of Metal Door Quality. Let's introduce the hardware commonly used for Metal Doors.