ANSI Door Hinge

The Hinge Is the Part Nobody Checks — Until the Door FailsWalk through most fire door inspections and the attention goes to the door leaf, the label, the closer, the latch. The hinge rarely gets a second look. It's three or four small pieces of metal holding the door to the frame, and on paper it lo

Template drilled hinges originated because of the need for absolute accuracy of the fixing holes in metal doors and frames.This allows for doors and frames to be pre-prepared because hinges produced by different manufacturers will have the drillings in exactly the same positions.For template pattern

DATA SHEETSANSI/BHMA A156.1:2016AMERICAN NATIONAL STANDARD FORBUTTS AND HINGESModel: DDSS001- 4.5x4.5x4.6mm-4BBGrade: 1Hinge height: 4.5 InchesDoor Weight: 150 lbs DateCycle CountTech2018/06/280Fingal Zhang2018/07/10211,440Fingal Zhang2018/07/19460,147Fingal Zhang2018/07/30750,556Fingal

The door can be said to be very important furniture, every place needs to use the door, so, the door hinge is very important, if the door hinge damage or wear, the door will not be easy to open, next let me introduce you how to adjust a door hinge.

D&D Hardware: ANSI Grade 1 Door Hinge Tested to over 2,500,000 cycles = Durability UL Listed : 3 hours Fire Rated, Suitable for Fire/Smoke Resistant Doors For Metal Doors, Fire rated Doors, Wooden Doors etc. Suitable for Education, Healthcare, Hospitality and Commercial Applications.

American National Standard Institute (ANSI) ANSI 156.1 This Standard establishes requirements for butts and hinges. Cycle tests, lateral and vertical wear tests, friction tests, strength tests, finish tests, and material and dimensional requirements are included.