What is the classification of the Rim Exit Device?

The Rim Exit Device is the center of the door lock and is an important part of the door lock. If the side of the door equipped with a lock is seen as a mouth, then the tongue is indeed like a tongue spitting in and out. The Rim Exit Device is divided into many kinds, there are oblique Rim Exit Device, square Rim Exit Device, anti-saw Rim Exit Device, and double hook Rim Exit Device, etc. The lock core is also divided into a single Rim Exit Device core and a multi-point Rim Exit Device core through the number of the Rim Exit Device. Can not imagine that the Rim Exit Device is so fancy! As with other technological products, the evolution of the lock tongue is also evolving with the times. In this article, we will introduce what kinds of locks are available.

Here is a list of content：

• Slanted Rim Exit Device

• Square Rim Exit Device

• Anti-saw Rim Exit Device

• Double hook Rim Exit Device

Slant Rim Exit Device

The first Rim Exit Device we commonly see is the slant Rim Exit Device, the slant Rim Exit Device's beveled design and its internal spring components are designed to facilitate the closing of the door, but because the structure also facilitates the "opening of the door", but the structure of the slant Rim Exit Device is too easy to be broken, so people invented the square Rim Exit Device.

Square Rim Exit Device

The square Rim Exit Device is different from the angled Rim Exit Device in that it does not contain a spring component and therefore cannot be automatically ejected or retracted due to external forces. The square Rim Exit Device is controlled by the action of opening and locking the door, its fixed, and because of this feature, we must make the square Rim Exit Device work throughout the operation. That is why most domestic external door locks are now using the slant Rim Exit Device and square Rim Exit Device with.

Anti-saw Rim Exit Device

There is another anti-saw Rim Exit Device, anti-saw Rim Exit Device through its strong material and internal rotating Rim Exit Device structure to increase the time of the saw Rim Exit Device, fingerprint locks anti-saw Rim Exit Device resists chainsaw time of at least 3 hours, greatly increasing the thief's "takedown difficulty".

However, thieves do have their unique method in the matter of destroying the door lock, if the Rim Exit Device is strong saw can not, they will be able to pry the door, some family locks are strong, but ignore the door, making the wrongdoers exploit the loophole. Their usual technique is to use a crowbar to pry the door out of the gap until the Rim Exit Device loses the function of locking the door.

Double hook Rim Exit Device

A double hook Rim Exit Device is an effective way to deal with this method, as can be seen from the figure below, a double hook Rim Exit Device in the "lock" state is a circle, the circle is to hook the door frame in a certain part as if a person's arms firmly holding a pillar, if you want to separate the person and the pillar, you must break its arms, however, from the structure of the double hook to say that this is very difficult, so double hook Rim Exit Device is a good solution to this problem.

In the purchase of locks, the Rim Exit Device also needs to pay extra attention to the outside door lock and must choose a multi-point Rim Exit Device cylinder to strengthen the security factor. At the same time, daily use of locks should also pay attention to the reverse lock, you know, not reverse lock is no different from the use of single Rim Exit Device locks. The above is the full introduction of this article on the Rim Exit Device, I hope to help you have a further understanding of the Rim Exit Device.

Contact us Now:

Contact: David Jian

Mob: 0086-139 2903 7292

Email: David@dndhardware.com, sales@dndhardware.com

Jobby Zhang

Mob: 0086-137 2599 9617

Email: jobby@dndhardware.com