Burglary door Rim Exit Device installation method?

The burglar door Rim Exit Device body is a security door core component. To make our home life secure, the security door Rim Exit Device is to have strong and durable characteristics, at the same time, the security door Rim Exit Device must also be convenient to apply, if the security door Rim Exit Device has a problem, whether we are in the door or close the door will bring us trouble and trouble. So, when the security door Rim Exit Device body is bad, we should replace how to install it? The following is the installation of the author's introduction for you to organize.

Here is a list of content：

• Introduction to the construction

• Rough steps

• Detailed steps

Introduction to the structure

The lock face of the security door Rim Exit Device generally uses the most advanced cast steel integrated structure, no internal artificial rivets and plastic parts, special technology to ensure that the security door Rim Exit Device is strong and durable, strong resistance to damage, to meet the use of anti-theft under the living room, public buildings. In general, the security door Rim Exit Device installation is to wait for the door to paint and dry, and then security door Rim Exit Device installation, to avoid paint sticking to the lock products, affecting the appearance and usability. Can also reduce the corrosion of the paint on the security door, reducing the service life of the lock.

Rough steps

Simply put, change the security door Rim Exit Device body first remove the door handle, then remove the security door Rim Exit Device core guard mouth, then remove the security door Rim Exit Device body four fastening screws, the security door Rim Exit Device body can be removed. But pay attention to the disassembly of the upper and lower lock connecting rod, especially when installed back.

Detailed steps  

1, by the security door Rim Exit Device lock body installation size illustration, drilling the lock body installation holes in the security door.

2, in turn, the security door Rim Exit Device body into the hole, fixed screws, outside the panel components to install the screw and connecting screw, the linkage square rod into the square rod hole in the lock body, the outside panel components handle square hole aligned with the linkage square rod hole, install the outside panel components.

3. Install the inner panel parts and fasten the screws after aligning them. Insert the lock head body from inside to outside into the lock body lock hole, insert the screw from the lock body panel hole to align the lock head body mounting hole threads, and fasten. Install the Rim Exit Device box or Rim Exit Device plate on the door frame.

4, after the initial installation, turn the outer handle, and the inner handle to observe whether the Rim Exit Device can be smoothly retracted, and extended. Turn the back panel knob to feel whether the square tongue is smoothly retracted, and insert the key to rotate back and forth to feel whether the square tongue is smoothly extended and retracted.

5, after fastening the assembly screws, repeat the action, and adjusting the position, until the lock is convenient and suitable.

The above is a small compilation of the security door Rim Exit Device body installation of the step-by-step content, I hope that you can play a role in helping you after reading. Burglar door is a basic barrier to protecting the safety of home life.

Contact us Now:

Contact: David Jian

Mob: 0086-139 2903 7292

Email: David@dndhardware.com, sales@dndhardware.com

Jobby Zhang

Mob: 0086-137 2599 9617

Email: jobby@dndhardware.com