The D&D Hardware rang of architectural lock is manufactured to the highest engineering standards and designed to offer a high price/performance ratio. They have been successfully type tested to all the requirement of BS EN 12209.
The appropriate specification and correct selection of hinges is crucial to their performance and depends on the following factors; 1. Is it a fire, smoke or emergency escape door? 2. How heavy is the door and what are the door dimension (height, width and thickness)? 3. What is the door's construction and are there any unusal features that could affect the hinges? 4. Where is the door situated e.g internal or external; is it near the coast or in a swiming pool? 5. What level of use/abuse will the door be subject to e.g office, hospital or school corridor? 6. What other items of hardware are to be fitted, that may be affect the hinge performance, typically door closer or door stops? 7. Any other unusal features involved e.g. door has radius top or the door is a bifold.
The door closer is a hydraulic device similar to the spring on the door head. When the door is opened, it can be released after compression, and the door can be closed automatically. It has the function of spring door, which can ensure that the door can be closed to the initial position accurately and timely after being opened.
BS EN 1154:1997 -The European standard for the performance of controlled door closing devices. Providing details on product types, classification by use, test cycles, test cycles, door mass, corrosion resistance, as well as definations, product performance requirements, test apparatus, test methods and marking of products. BS EN 1154:1997 classifies door closers by using a 6 digit coding system.
It is desirable that doors at final exit in public buildings,places of intertainment, shops etc should be fitted with panic devices operated by a horizontal bar or touch bar. the emphasis for products coverd by this standard on safe exit rather than security.
Are classified under the same classifications as the door hardware in/on which they are integrated. This means that the access control systems supplied by GBM Solutions is classified according to EN1303 – cylinder for locks, DIN EN 18252 – locking cylinder for door locks, DIN EN 1906-door handles and door konbs and DIN EN 179 apply for the equipment that we supply .
BS EN 1906 classifies door furniture by using an 8 digit coding system. A similar classification applies to all building hardware productStandards so that complementary items of hardware can be specified to, for instance, a common level of corrosion resistance, category of use, etc. Each digit refers to a particular feature of the product measured against the standard's performance requirements.
D&D grade 3 level handle are suitable for high frequency of use by public or others with little incentive to exercise care and with a high chance of misuse , e.g.public office doors ,common area doors etc.