Why Glass Door Hardware is the Core of Hardware

The so-called tempered Glass Door Hardware accessories refer to large and small hardware product accessories, such as Glass Door Hardware floor springs, upper and lower door clips/curved clips, Glass Door Hardware locks, and handle products. Among them, the Glass Door Hardware floor spring is the core soul of the entire Glass Door Hardware. Floor springs are hydraulic door closers, but the device that compresses the springs is a worm gear instead of a rack and pinion.

Here is the content list:

• Open Glass Door Hardware in both directions.

• Better quality and higher precision.

Open Glass Door Hardware in both directions.

Glass Door Hardware floor springs can be used for doors that open in both directions because the worm gear can rotate in both forward and reverse directions, while door closers are Only for doors that open in one direction. The technical key of the floor spring is the bearing seat at the lower part of the main shaft, which determines the load-bearing level of the floor spring. Because the floor spring used for the two-way door should bear the weight of the door body, compared with the door closed, the weight of the door body plays a decisive role in the selection of the floor spring. In practical applications, the weight of the door leaf generally does not exceed the maximum load-bearing capacity of the Glass Door Hardware floor spring, so the selection of the Glass Door Hardware floor spring model by the door width and wind pressure is the first choice. In addition, pay attention to the aspect ratio, that is, the ratio of height and width. If it is too disproportionate, the door leaf will not work properly.

Better quality and higher precision.

From the production point of view, the worm gear structure of the Glass Door Hardware floor spring makes the compression degree of the spring smaller than that of the rack-and-pinion door closer, and the force arm of the floor spring to close the door is also shorter, so the quality of the floor spring is very important to the structural design and machining accuracy. higher dependency. In addition, due to the large force of the two-way door leaf on the floor spring along the door leaf plane, the service life of the low-grade floor spring will be very different from high-grade floor springs. A Glass Door Hardware, which switches thousands of times a day, relies entirely on floor springs. A good Glass Door Hardware must have a good floor spring, and a good floor spring must have a good Glass Door Hardware. Therefore, choosing the right spring is the last word.

Our official website is https://www.dndhardware.com/. If you work with Glass Door Hardware or want to learn more about our company, you can communicate with us on the website. Our cost-effective products are highly praised by everyone. We will wholeheartedly provide users with more and better services with high-quality products, good service, and competitive prices!