Publish Time: 2023-02-20 Origin: Site
To save money, when installing Architectural Door Hardware, many friends would rather choose to learn about it on the Internet, buy the materials, and then install it by themselves, but the troubles come out one after another. So I will share with you three installation methods of Architectural Door Hardware.
Here is the content list:
Normal installation method.
Cement filling method.
Mounting sheet mounting method.
First measure whether the size of the Architectural Door Hardware is the same as the installation hole. If the size of the hole is smaller than the steel door, you need to remove the ash. Lay the steel door flat according to the position of the hole, then drill the four mounting holes of the Architectural Door Hardware door frame with an M12 drill bit, and fix it with M12 bolts before adjusting. Adjustment method: Take the outer surface of the door leaf as the reference plane, and check whether the door frame is parallel to the door leaf after installation. If the Architectural Door Hardware door frame is not parallel to the door leaf, add a wooden pad on the back of the door frame near the screw position until the door leaf is parallel.
Because the door frames of Architectural Door Hardware are hollow, to make the door stronger, cement must be filled in the hollow of the door frame. After filling the cement and closing the door, please pay attention to the opening surface of the door leaf, and a paper pad should be inserted between the door frame and the door leaf. Filling cement can not be excessive, otherwise, the door frame will be deformed, which will affect the use and opening of the door. After filling the cement for 4 hours, remove the paper pad, gently open the door leaf, use a screwdriver to scrape the cement in the drilled part of the frame, and then cover the installation hole. Functionality may be affected if the Architectural Door Hardware frame is not filled with cement.
Remove the Architectural Door Hardware door leaf, then put the door frame into the door opening, and use a spirit level to plumb to check whether it is straight. If it is not level, use a wood chip pad to level it. First, take the inner door hinge side as the reference edge, rotate the mounting piece on the door frame reinforcing rib to be perpendicular to the door frame, then bend the mounting piece and fix it on the wall with cement nails. Put the Architectural Door Hardware inner door on the door frame and lock it. In the case of ensuring that it is flat, fasten the inner door lock side mounting plate to the wall one after another. Use the same method to put the outer door on the door frame, and after fixing the installation piece, check whether the switch between the inner door and the outer door is flexible. Pour cement mortar into the door frame. After the street cement mortar solidifies and dries, take out the wood chips outside the door seam to use the door function. However, within 24 hours, try to reduce the number and strength of opening the Architectural Door Hardware.
Our official website is https://www.dndhardware.com/. If you work with Architectural Door Hardware or would like to learn more about our company, you can communicate with us on the website. We will wholeheartedly provide users with more and better services with high-quality products, good service, and competitive prices!
Contact us Now:
Contact: David Jian
Mob:0086-139 2903 7292
Email: David@dndhardware.com, sales@dndhardware.com,
Jobby Zhang
Mob:0086-137 2599 9617
Email: jobby@dndhardware.com