Types of door bolts Door bolts provide a means of securing a door from the inside.Reasonable security is usually provided those inside the building without any means of operating the bolt from the outside. Non-ferrous metals such as aluminum and brass are commonly used in the manufacture of bolts f

Like kick plates and armor plates, door stops are protection devices. Their purpose is to stop or stop and hold a door at the desired point of its opening cycle. This prevents damage to the door or door frame, its hardware and adjacent walls, furniture, columns or equipment. Types of stops that D&D

Template drilled hinges originated because of the need for absolute accuracy of the fixing holes in metal doors and frames.This allows for doors and frames to be pre-prepared because hinges produced by different manufacturers will have the drillings in exactly the same positions.For template pattern

Intumescent materials other than edge strips are used on fire resisting doors. For example, thin sheet material can provide insulation and protection: ◆ behind hinge blades ◆ around mortise lockcases ◆ around concealed door closers Intumescent pads can protect hinge positions. Various thicknesses ar

What is spring hinge? Single action spring hinge:A spring hinge has a spring in its “knuckle”, which is larger than usual. The spring is linked to one flap at the top and the other flap at the bottom. Therefore, when the door opens, the spring is wound up, as the two flaps rotate apart. When the do

Before you are being introduced to any products you should understand why some items of hardware are handed. This means that certain products will not suit all doors or windows and below are intended to help you know which products may be handed and how to determine the correct one.

Cross-keying is a term that is used to describe a cylinder that is operated by more than one change key. This is different than a master keyed cylinder because usually a cylinder that is master keyed will only be operated by one change key as well as the master key.

Keying systems are available in various degrees of complexity depending on the number of keying levels used. Change keys form the lowest level of the hierarchy of a key system. Master, grand master and great grand master keys form the higher levels of hierarchy of key systems. Level one systems cons

What is master key?
A master key is a key which will open all the locks in a set, even though each lock has its own different key.

A door lock is a device used to lock a door in place to prevent others from opening this door. Door locks are widely used and can be found almost everywhere. As people's quality of life levels increase, there are more and more types of door locks. However, many people do not know how to properly sel